Homepage 8

14Nov2018: Moto-Cycle OEM – Manufacturing Quality Parts
High-Star has made quality parts based on models or drawings from various OEMs. We have recently completed a project requiring various parts to be made for a certain brand of motorcycle. When the terms of the project were finalized, we got to work machining the specified quality parts.

12Nov2018: ATV Parts – Manufactured From OEM Drawings
High-Star has formed relationships with many well-known and respected companies. In this project, we manufactured parts for a brand of ATV based on the drawings we received from the OEM. After looking at how many of each part we needed to make, we obtained the materials needed for the project. We manufactured the

01Nov2018: High-Performance Heads – Reengineered For Better Fuel Economy and Torque
High-Star Heads are made from the finest certified aircraft grade aluminum. Our proprietary one piece design is completely CNC machines to exact tolerances, incorporating large heat sinks for maximum cooling ability. Every High-Star head is then anodized with a distinctive gold finish for corrosion resistance and a unique custom appearance. If you’re looking to improve

01Nov2018: Engine Mount – Reengineered for Reliability
The engine mount is a small volume production that is produced in 25 piece lots two to three times per year. This part is 100% made in house here at High-Star. We order raw material, in the case of the photo above 3/8 & 3/4 steel plate. The plates are then plasma cut in the

01Nov2018: Dump Gate – Re-engineered for extended Durability
The photo above is a good example of a product that High-Star provides to the cement production industry. The dump gate is used in mixing cement in preparation for use. The stone and sand are poured into the mix through the dump gate. Due to the fact that stone and sand are very abrasive, the

01Nov2018: Cooler Plate – Reengineered to Reduce Costs and Improve Consistency
This is a liquid cooled heat-sink for a diesel engine computer. It uses the diesel fuel from the engine as the cooling source while it flows through the plate. The original design from the customer was a three piece stamping that was silver soldered together and then pressure tested for leaks. This design was difficult

31Oct2018: Carrier Supports Police with Special Wrapped Truck
On July 8, after five law enforcement officers were killed by a sniper the day before in Dallas, Wisconsin-based Contract Transport Services shared a message on its Facebook page. “On such a somber day for our nation, CTS is proud to put in service today our Police Wrapped truck,” said CTS President Curt Reitz in

31Oct2018: Daimler trucks open office in Nairobi
Vehicle manufacturer Daimler is betting on cargo transport to remote off road locations to increase sales of commercial trucks in the central Africa region. It said the commercial vehicles that are marketed under the Fuso and Mercedes brands sold 6,000 units in the central Africa region in 2015. The company is targeting a four per

31Oct2018: Ford Expanding Truck Plant In Louisville
Ford Motor Co. intends to boost the size of its stamping facility, body shop and materials handling at the Kentucky Truck Plant. In plans filed with Metro Louisville zoning officials, the company is seeking approval to add a total of 288,715 square feet at a handful of locations on its 413-acre site at 3001 Chamberlain

31Oct2018: Fontaine Opens New Truck Modification Center in Avon Lake, Ohio
Fontaine Modification Vocational Services has opened a new modification center in Avon Lake, Ohio, to provide modifications for Ford F-650/F-750 medium-duty trucks. The facility is located across the street from Ford’s Ohio Assembly Plant, where F-650/F-750 production moved from Mexico last summer. “Fontaine has put significant effort into developing modifications specifically for the all-new F-650/F-750

High-Star Corporation